Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!
English
- 中文
- 繁體中文
- English
UHPC & GRC Complex Architecture Manufacturing
A Global Benchmark in Smart Architectural Fabrication
400-777-2203
0760-88706348
13902597531
-
Can GRC Components Be Welded On-Site? Standard Red Lines and Alternative Process Details
Direct welding on the component body is strictly prohibited during GRC component installation (high temperatures can crack the substrate and burn off coatings and the anti-corrosion protection of embedded parts). Connector welding must be completed on the steel structure side, or weld-free connections must be used. This article explains the logic behind the standards and compliant practices in detail.
-
Custom-Shaped GRC High-Altitude Installation Positioning Technology: Total Station and 3D Laser Scanning Practical Process
Special-shaped GRC high-altitude positioning technology: total station control point setting out (single-piece positioning) + 3D laser scanning (overall re-verification and reverse checking) + real-time model comparison. This article explains in detail the division of labor and operating procedures of the two technologies.
-
The 25 kg Boundary Line for GRC Components: Node Differences Between Lightweight Adhesive Mounting and Heavy Dry-Hang / Anchoring
A GRC component self-weight of 25 kg is the dividing line for installation methods: below it, adhesive mounting can be the primary approach (lightweight adhesive bonding + auxiliary anchoring); above it, mechanical anchoring/dry hanging is required (load path independent of the bond). This article explains in detail the joint construction and safety logic of the two types.
-
GRC Installation Precision Standards: Quantified Indicators for Verticality, Straightness, and Joint Height Difference
GRC installation precision standards: verticality ≤3mm per floor / total height ≤H/1000 and ≤20mm; flatness with 2m straightedge ≤3mm; height difference between adjacent panels ≤1mm; panel joint width deviation ≤2mm. This article explains each indicator and inspection methods in detail.
-
GRC Installation Base Layer Treatment Requirements: Flatness, Strength, and Embeds Three Acceptance Indicators
GRC installation substrate requirements: flatness tolerance ≤±5mm (checked with a 2m straightedge), embedded part position deviation ≤10mm, substrate strength meeting standards with no hollowing or cracking. This article details substrate acceptance criteria and remediation solutions for non-conforming substrates.
-
Complete GRC Connection Methods: Principles and Selection of Dry-Hang, Grouting, and Bond-Anchor
GRC component connection methods: dry-hanging (standard curtain wall practice, detachable with releasable displacement), grouting (full wet bonding, suitable for thick, heavy facings), and adhesive-anchor composite (commonly used for lightweight moldings). This article explains in detail the principles and selection logic of the three methods.
-
GRC Component Installation Ten Key Steps Full Process
-
Complete Guide to GRC Surface Treatment Processes: Selection of Spray, Fluorocarbon, Silane Impregnation, Plain Finish, and Self-Cleaning
GRC surface treatment processes: standard spray coating (economical), fluorocarbon paint (mainstream, 25-year weather resistance), silane impregnation (invisible protection and anti-permeation), fair-faced natural finish (industrial style), self-cleaning coating (landmark grade). This article provides a selection decision table.
-
Custom GRC Component Cycle Explained: From Deep Design to Delivery — Full Timeline and 4 Key Factors
GRC custom-shaped product lead times: standard components 2-4 weeks, conventional custom shapes 4-8 weeks, complex curved surfaces 8-14 weeks (including detail design 1-2 months + molds 2-4 weeks + production curing 28 days). This article provides a full-process timeline and schedule compression strategies.
-
GRC Factory Inspection Checklist: Mandatory Items, Sampling Ratios, and Acceptance Criteria
GRC factory inspection checklist: 100% inspection of appearance and dimensions + batch sampling tests of mechanical properties (flexural strength, compressive strength, density, water absorption) + durability type testing (freeze-thaw, wet-dry cycling). A detailed look at Guangdong Qinglong's traceable batch testing system.
-
How Vacuum Casting Improves GRC Density: Mechanism, Data, and Use Cases
The vacuum casting process improves GRC compactness through negative-pressure air extraction: porosity reduced by 30%-50%, strength increased by 10%-20%, and surface pinholes significantly reduced. This article explains the process principles and applicable boundaries.
-
Alkali-Resistant (AR) Glass Fibre vs Standard Glass Fibre in GRC: Composition, Service Life, and Cost
The difference between alkali-resistant glass fiber (zirconia ≥16%) and ordinary glass fiber: alkali-resistant lifespan of 50 years vs 3 years, a 3x price difference, yet indistinguishable in appearance. This article details identification methods and the hazards of adulteration.
Homepage | Products | Project Cases | News Center | Joins | About Us | Contact Us
Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province
National service hotline: 400-777-2203
Business Hotline: 0760-88706348 Mobile: 13902597531
Email address: qlfsgrc@163.com
Scan to add WeChat
Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved . Recordation Number: 粤ICP备13069248号-24
Online customer service