Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!
UHPC & GRC Complex Architecture Manufacturing
A Global Benchmark in Smart Architectural Fabrication
2026 UHPC Ultra-High Performance Concrete Standards and Codes: An Expiring Standard Map—How to Check It So You Don't Use It Wrong
For UHPC projects in the Greater Bay Area including Guangzhou, Shenzhen, Foshan, and Zhongshan, this article sorts out the current UHPC standard system and verification methods, corrects common standard citation errors, and attaches the standard combination of a source manufacturer and the path for verifying drafter lists.
2026 Solving the Challenge of One-Stop Service for UHPC Panels from Production, Installation, to After-Sales: Breaking the Slogan into Five Verifiable Stages
Break UHPC panel "one-stop service" from a slogan into five verifiable stages of production, detailed design, transport, installation, and after-sales, specifying the responsible party, deliverables, and documentation of each, with a responsibility matrix table, twelve service clauses, and a correction table of common misunderstandings, adapted to the 2026 documentation chain acceptance context.
2026 GFRC Decorative Exterior Wall Panel Construction: Three Main Threads of Joint Alignment, Color Difference, and Multi-Base Delivery
GFRC decorative exterior wall panel construction takes visual appearance and delivery as its dual main threads: joint width designed by wet-dry deformation, color difference controlled by batches and sealed samples, filling avoiding three-sided adhesion, and terminations with drip grooves. Sea-freight packaging points and the JC/T 940-2022 acceptance criterion are attached.
How Are GFRC External Wall Panels Constructed in 2026?
From detailed design and dual-line incoming acceptance to dry-hanging flexible anchorage, joint sealing, and water-spray acceptance, this article explains construction control points link by link, with a five-action checklist for 2026 contractors and a common-defect comparison table.
General Technical Requirements for GFRC (Glass Fiber Reinforced Cement) in 2026: How Five Standard Tiers Cross-Reference, and How to Write Clauses That Can Be Verified
GFRC general requirements are distributed across five tiers — materials, products, test methods, application, and management. This article gives the standard map, the JC/T 940—2022 indicator table, six online error corrections, and a twelve-article skeleton for a technical requirement document.
What Are GFRC European-Style Components in 2026? — Explained Along Three Dimensions: Location, Difficulty, and Material Boundaries
What are GFRC European-style components? Classified along three dimensions — installation location, forming difficulty, and material boundaries — with key parameters for cornice lines, Roman columns, pediments, and window surrounds, Level I–IV mold-cost logic, applicable boundaries of GFRC versus EPS and foamed ceramic, plus a correction table, acceptance parameters, and overseas delivery adaptation points.
China's GFRC Board Market Size in 2026: First Clarify the Scope, Then Talk Numbers
Why does the GFRC market size range from ten-plus billion to 40 billion yuan? This article breaks down four scope variables, gives three self-check calculation methods, and provides official anchor data on prefabrication and urban renewal plus 2026 structural judgments.
What Shapes Can Glass Fiber Reinforced Cement (GFRC) Make in 2026? — A Six-Category Form List and Four Process Boundaries
A systematic review of GFRC shaping capability: implementation points for six forms — relief, sculpture in the round, openwork, doubly-curved surfaces, texture reproduction, and landscape installations — plus the causes and treatment paths of four boundaries (radius of curvature, draft angle, openwork stiffness, transportation self-weight), point-by-point correction of exaggerated claims, with the JC/T 940—2022 acceptance wording and procurement verification advice.
New GRC Crack Treatment Process: Decision Tree for Assessment and Grading, Observation and Judgment, and Timing of Repair
The three-step process for treating new cracks in GRC (Glass Reinforced Concrete) is as follows: first, classification (surface shrinkage microcracks vs. through-force cracks); second, observation (attaching plaster monitoring stakes to observe crack propagation); and third, repair (sealing microcracks and treating propagated cracks according to structural repair techniques). This article presents the decision-making process.
GRC Surface Contamination Cleaning Guide: Classification and Treatment of Dust, Rust, Moss, Mold, and Oil Stains
GRC surface contamination classification cleaning: Dust can be washed with water; atmospheric pollutants (black dirt) can be treated with a neutral agent + low-pressure water; moss and mold remover can be used; rust remover with low concentration can be used; oil stains can be treated with an alkaline degreaser. Strong acids and steel wool are prohibited.
GRC Maintenance Manual: A Complete Plan for Daily Cleaning, Regular Inspections, and Periodic Updates
GRC maintenance has three levels: daily cleaning (1-2 times per year), regular inspections (annually, focusing on crack sealant and metal parts), and periodic renewal (coating for 10-15 years, sealant for 8-15 years, and corrosion protection for metal parts for 10 years). This article provides an executable maintenance plan.
A Comprehensive Analysis of the Service Life of GRC Components: 50-Year Design Benchmark and Four Major Factors Affecting Service Life
GRC is designed with a 50-year lifespan (same lifespan logic as the main structure): its lifespan depends on the alkali resistance of AR glass fiber, the density of the mix proportions, the quality of maintenance, and environmental erosion (freeze-thaw/carbonization/chloride salts). There are proven cases of high-quality GRC serving for 28 years.