Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

English
  • 中文
  • English
  • عربي
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

2026 UHPC Decorative Panels: Performance Characteristics, Technical Indicators, Usage Methods, and Safety Matters — Putting "Decorative Panels" Back Within the Standard Framework

2026-11-18 15:19:24

Click:

UHPC decorative panels are a high-frequency term for public-building facades in recent years, but the four practical questions surrounding them — what the performance characteristics are, which table shows the technical indicators, how to use them, and which links are prone to safety accidents — are mostly answered online at the level of adjectives such as 'high strength, high durability, strong plasticity.' This article puts these four questions back within the standard framework and breaks them down one by one: performance is expressed through indicator groups, technical indicators are checked to clause numbers, usage methods are broken down into processes, and safety matters are classified by link. First, one premise must be made clear: 'decorative panel' is itself not a standard term.

1. Concept Definition: What Standard Object Does 'Decorative Panel' Correspond To

Products called 'UHPC decorative panels' on the market correspond to three different objects in the current standard system; before purchasing, first confirm which category you are buying:

Market Name

Standard Object

Corresponding Standard

Typical Use

UHPC decorative panel, decorative curtain-wall panel

Ultra-high performance concrete (UHPC) decorative products

T/CBMF 172—2022 / T/CCPA 31—2022

Curtain-wall panels, decorative strips, hollow panels, relief panels, countertops, landscape features

UHPC exterior wall panel (with insulation or functional layer)

Ultra-high performance concrete (UHPC) exterior wall panel

T/CBMF 171—2022 / T/CCPA 30—2022

Enclosure wall panels, prefabricated panels containing a functional layer

Generic 'UHPC non-load-bearing components'

Test methods for the properties of non-load-bearing components

GB/T 45594—2025

The test-method level, providing a unified test basis for the above products

 

The relationship among the three is: 172 governs product requirements, 171 governs product requirements with enclosure functions, and 45594 provides test-method support. When writing a technical specification, the object name should correspond to the standard name — generically writing 'UHPC decorative panels are implemented per XX standard' tends to lead to disputes at the acceptance stage.

Also note the boundary: the industry also has neighboring standards of the type T/CBMF 346—2025 'High Performance Concrete (HPC) Decorative Components'; HPC and UHPC are not the same thing and have different indicator systems, so citations should not be mixed.

2. Standard Anchoring and Three Applicability Boundaries

Boundary 1: The core national standard is still the 2015 version. GB/T 31387—2015 'Reactive Powder Concrete' is the current material standard; its revised version has been renamed 'Ultra-High Performance Concrete' and, as of November 2026, still shows 'under review' on the official standards platform; the draft submitted for approval cannot serve as an acceptance basis. Online material citing the 'GB/T 31387—2025' version number is a pre-release version citation; do not write it this way in contracts.

Boundary 2: Curtain-wall system standards cannot be applied generically. JGJ 336—2016 'Technical Code for Engineering of Artificial Panel Curtain Walls' does not list UHPC panels in its applicable-panel list; GB/T 21086—2007 'Building Curtain Wall' does not apply to exterior-wall decoration systems where panels are directly bonded to the main structure. The system design basis for UHPC panel curtain walls should be the combination of standards explicitly specified in the design documents.

Boundary 3: The testing commissioning entity is regulated. Per 'Measures for the Administration of Quality Testing of Construction Projects' (MOHURD Order No. 57), a test report issued by a testing institution not commissioned by the construction entity cannot serve as project quality acceptance material; a manufacturer self-inspection report can only serve as a capability reference.

3. Performance Characteristics: Five Advantages, Each With a Premise

1. High strength. Compressive strength not less than 120 MPa (per T/CBMF 172—2022), about 3–5 times that of ordinary concrete. Premise: this is the judgment value at the test-lot age (natural curing 28 days or thermal curing 7 days); early strength cannot replace grade determination.

2. Dense and durable. Low water absorption, no delamination or spalling after 200 freeze-thaw cycles, and shrinkage rate subject to an upper limit. Premise: density is built on the foundation of not cracking — once a through crack appears, the durability advantage is significantly reduced.

3. Better toughness than ordinary concrete. Steel fiber toughening gives the panel higher impact and flexural resistance than a brittle matrix. Premise: toughness varies with fiber type and content; the three columns in the table (steel fiber / organic-inorganic fiber / glass fiber) differ markedly, so assessing toughness requires first asking about the fiber system.

4. Non-combustible substrate. UHPC is a concrete-based material and can generally reach a non-combustible grade under the GB 8624 system. Premise: non-combustible does not mean the fire-resistance rating is met — internal steam pressure at high temperature may cause spalling; fire-protection design requires a matching structure (polypropylene fiber for pressure relief, fire coating or fire board), and one cannot simply write 'Class A fireproof' and consider the fire problem solved.

5. Integration of shaping and surface. Color and texture are formed in one go at casting; curves, hollows, and reliefs are possible. Premise: the mold cost and production cycle of shaped and hollow panels are highly sensitive to shaping complexity, which must be factored into cost and schedule at the selection stage.

4. Performance Boundaries: Three Shortcomings and Engineering Responses

Shortcoming

Manifestation

Engineering Response

High cost

Steel fiber accounts for about one-third or more of manufacturing cost; the ratio rises with the strength grade

Select materials by grade according to location; use high specification at visual focal points, lower specification at secondary locations

Large shrinkage

Early drying shrinkage can exceed the 800 με level (per literature reports)

Strict steam curing regime, control the water-binder ratio, retain curing records at the factory

Edge brittleness

High overall strength but edges and corners easily develop latent cracks, appearing only after knocks in hoisting and transport

Dedicated lifting tools, soft isolation between panels, standing re-inspection on arrival, no hard prying for correction

 

5. Technical Indicator 1: Appearance Quality (T/CBMF 172—2022 Clause 7.1)

Item

Standard Requirement

Edges

Product edges should be neat and regular

Appearance face

Should not have missing edges or corners, cracks, honeycombing or pockmarks, flash or burrs, or obvious color differences

Side joint areas

Should not have holes

Holes on the appearance face

Length not greater than 3 mm, depth not greater than 2 mm, and not more than 1 place/m²

Special decorative effects

May be determined by both supply and demand parties

 

Note the sentence 'special decorative effects may be determined by both supply and demand parties': the acceptance basis for hollow, relief, and stone-like-texture products should be written into the contract, subject to the sealed sample; otherwise there is no basis for judging color difference and texture differences.

6. Technical Indicator 2: Dimensional Allowable Deviations (T/CBMF 172—2022 Table 1)

Item

Allowable Deviation

Length

When ≤2 m, ±2 mm/m; when >2 m, total deviation ≤4 mm

Width / Height

When ≤2 m, ±2 mm/m; when >2 m, total deviation ≤4 mm

Diameter (circular products)

±2 mm/m

Thickness

0–+2 mm

Flatness (flat products)

≤3 mm (except where special surface decoration effects are required)

Diagonal difference (rectangular products)

By area grade, subject to the standard text

Shaped products

Determined by both supply and demand parties

 

GB/T 45594—2025 also gives criteria for lateral bending (1 mm/m and ≤8 mm) and warpage (1 mm/m and ≤10 mm) for non-load-bearing components; flat products may include these in the inspection items as well.

The system difference in viewing distance is worth a separate note: the UHPC non-load-bearing component criterion is visual inspection of defects at 1 m from the appearance face and no obvious color difference at 3 m; while GRC decorative products (JC/T 940—2022) use 1 m for defects and 6 m for color difference. The two criteria are inconsistent; mixing systems when compiling an acceptance plan will directly produce errors.

7. Technical Indicator 3: Physical and Mechanical Properties (T/CBMF 172—2022 Table 2)

Table 2 is divided by 'process × fiber type,' with different indicators in each column:

Property

Casting / extrusion / pressing · steel fiber

Casting / extrusion / pressing · organic-inorganic fiber

Casting / extrusion / pressing · glass fiber

Spraying process

Compressive strength

≥120 MPa (uniform across all columns)

≥120 MPa

≥120 MPa

≥120 MPa

Flexural proportional limit strength

≥13.0 MPa

≥12.0 MPa

≥11.0 MPa

≥12.0 MPa

Ultimate flexural strength

≥20.0 MPa

≥12.0 MPa

≥22.0 MPa

≥12.0 MPa

Impact strength

≥24.0 kJ/m²

≥9.0 kJ/m²

≥15.0 kJ/m²

≥9.0 kJ/m²

Volumetric density (dry)

≥2.4 g/cm³

≥2.2 g/cm³

≥2.2 g/cm³

≥2.2 g/cm³

Water absorption, freeze resistance, shrinkage

Same magnitude as the exterior-wall-panel standard (water absorption ≤1.2%–1.5%, 200 freeze-thaw cycles, shrinkage ≤0.06%), subject to the official standard text when cited




 

Unit correction (a high-frequency point of confusion): the unit of impact strength in UHPC product standards is kJ/m² (an area unit); in the GRC decorative-product standard JC/T 940—2022 it is kJ/m³ (a volume unit). The two systems use different units and the values are not comparable; mixing them is a common error in online material — if you see 'impact ≥12 kJ/m³' labeled on a UHPC panel, or '≥24 kJ/m²' on GRC, check the original standard first.

Age criterion: natural-curing specimen age not less than 28 days; thermal-curing (90 ℃) specimen age not less than 7 days. Also, per the draft text soliciting comments, glass-fiber-reinforced products (UHPGRC) should not use thermal curing — when inquiring about glass-fiber-type products, confirm the manufacturer's curing method and age criterion.

8. Technical Indicator 4: Connection Safety Indicators (GB/T 45594—2025 Appendix Criteria)

Decorative panels are hung on the wall by connectors; the mechanical indicators of the connectors are more critical than the panel strength:

Item

Indicator

Anchor rod pull-out force

≥10.0 kN

Embedded bolt sleeve pull-out force

≥10.0 kN

Applicability note

When the component configuration does not include anchor rods or embedded sleeves, the corresponding item is not required; other connection methods are determined by both supply and demand parties

 

Key point: pull-out tests must use an anchoring structure consistent with the project (factory-drilled holes, factory-embedded parts); on-site hole enlargement or substitute embedding amounts to changing the load-bearing system. Claims online such as 'single-point bearing capacity above 5 kN' have unclear origins; when purchasing, require a third-party pull-out report per the standard criteria.

9. Common Errors in Online-Circulated Indicators

Circulated Claim

Problem

Correct Criterion

'Flexural ≥15 MPa, water absorption ≤3%'

Patched-together values on a marketing page, not standard clauses

Take values by column per T/CBMF 172—2022 Table 2

'Fire-resistance rating 2 hours' 'upgraded to 2 hours over EPS'

No corresponding test basis

Fire-resistance rating per the component test report; non-combustible ≠ fire-resistance rating met

'Impact ≥24 kJ/m³'

Unit mixing

The UHPC system uses kJ/m², the GRC system uses kJ/m³

'Vacuum-assisted forming, joint ≤2 mm, precision ±1 mm'

Small-workshop promotional talk, no traceable basis

Process parameters subject to acceptance measurement and contract agreement

'GB/T 31387—2025'

Pre-release version citation

The current version is the 2015 version; not an acceptance basis before the revised version is released

 

10. Usage Method 1: Selection and Detailed Design

Thickness and panel size: common industry practice is conventional flat panels 20–25 mm thick, with curved and hollow panels appropriately thickened; a single panel size is commonly controlled not to exceed about 3 m × 4 m, and oversized panels must be specially calculated and justified. Specific values are subject to structural calculation and the manufacturer's process capability; the online-circulated 'thinnest 15 mm' should not be taken as a design basis — the risk of latent cracks in transportation and installation rises as thickness decreases.

Four things in detailed design: geometric basis (whether based on site measurement or on the axis should be fixed in writing), layout numbering (each panel independently numbered to correspond to its installation position), load path (separation of gravity support points and wind-resistance connection points), and embedded-part coordination (the attribution of the interface with main-structure embedded parts or post-installed anchors).

Sample first: color, texture, and joint width are subject to the sealed sample as the acceptance basis; the sample should be written in as a hold point — no batch production before confirmation.

11. Usage Method 2: Hanging and Leveling

• Connection method: back bolt dry hanging is the mainstream in engineering — stainless steel back bolts are factory-drilled and hole-enlarged on the panel back to form a mechanical lock, without relying on panel-edge slotting, thus avoiding edge chipping at the slot;

• Load logic: gravity support points carry self-weight (commonly two upper support points with lower limiting points), and wind-resistance connection points carry wind pressure and suction; the two types of points are separated and cannot be interchanged;

• Installation details: elastic gaskets are provided between the hanger and the panel back to avoid rigid-contact corner chipping; isolation pads are added at dissimilar-metal contacts to prevent electrochemical corrosion; three-dimensional adjustable hangers are first leveled, joint-adjusted, and adjusted for in-out position, then re-tightened after locking;

• Leveling basis: use long straightedges and laser instruments to check panel flatness and joint-width uniformity, checking each panel before moving to the next.

12. Usage Method 3: Joints and Surface Treatment

• Joint reservation: the UHPC linear expansion coefficient is about 10×10⁻⁶/℃; leaving no joint or an insufficient joint width will cause crushing cracks under temperature deformation; the common industry joint width is 8–12 mm, with the specific value determined by calculation;

• Closed-joint method: fill the joint with a closed-cell backer rod, with a filling depth of about half the joint width, control the sealant width-to-depth ratio, and avoid three-sided adhesion; apply neutral silicone weather-resistant sealant, with application temperature and weather conditions per the sealant instructions, and stop outdoor application in rain and strong wind;

• Open-joint route: a pressure-equalized drainage structure; per the GB/T 21086 criterion, water tightness may not be required, but the pressure-equalized chamber and drainage holes must be closed and effective;

• Surface protection: outdoor panel faces should receive a penetrating protection treatment to reduce efflorescence and pollutant adsorption; the effect of the protective agent varies with the substrate water absorption, so trial on a small panel before full-scale construction.

13. Safety Matters 1: Production Stage

• Steel-fiber handling protection: the exposed ends of steel fibers are sharp; when batching and cleaning the mixer, wear cut-resistant gloves and goggles, and never reach into the mixture with bare hands;

• Mixing-equipment discipline: a forced mixer (planetary or twin-shaft horizontal) must be used, with batching performed in the three steps of dry mixing, wet mixing, and fiber scattering, with no water added midway — batching discipline is both a quality requirement and a safety requirement (poor fiber dispersion leads to local weak planes);

• Steam-curing control: heating and cooling rates and shed-exit temperature difference follow the process regime; thin panels crack easily on sudden cooling; confirm whether glass-fiber-reinforced products are suitable for thermal curing;

• Laboratory capability: T/CBMF 314—2025 / T/CCPA 67—2025 'Basic Conditions for Laboratory Construction of Ultra-High Performance Concrete Non-Load-Bearing Component Manufacturers' may be referenced to verify a manufacturer's self-inspection capability — equipment list, tester staffing, and completeness of original records.

14. Safety Matters 2: Transportation and Hoisting

• Packaging and stacking: transport on dedicated racks, with soft isolation between panels and metal connectors packaged separately against rust; the on-site stacking area should be level, with wooden spacers aligned top and bottom, and no diagonal leaning stacks;

• Hoisting: use vacuum suction cups or dedicated clamps; single-side lifting is prohibited; before hoisting large panels, check the lifting points and center-of-gravity marks; buffer on landing, and no hard prying or hammering for correction;

• Latent-crack risk: latent cracks from edge knocks appear only after installation; standing re-inspection on arrival and panel-by-panel visual inspection are the interception means; for suspected panels, tapping sound or local testing may be added;

• Cross-border transportation: a hot, humid marine environment increases packaging moisture-proof requirements; extend the standing adaptation time after arrival before installation.

15. Safety Matters 3: Connection and Use Safety

• Pull-out re-inspection: anchor-rod and embedded-sleeve pull-out forces are sampled by lot, and reports must be traceable to the shipping batch; the commissioning entity follows MOHURD Order No. 57;

• Fall-protection measures: large-inclination and high-altitude panels should have secondary fall-protection structures; access openings and inspection paths are reserved at the detailed-design stage, and nodes should be inspectable after delivery;

• Load-bearing boundary: decorative railings and decorative cover plates are not used as load-bearing structural components; parts involving personal safety, such as free-standing guardrails, must be separately designed and constructed as structural components — this must be stopped at the drawing stage;

• Fire-protection measures: implement the polypropylene-fiber content, fire coating, or fire board per design requirements, and check concealed-work records at acceptance.

16. Two Disciplines for Testing and Acceptance Compliance

First, the commissioning entity: testing is commissioned by the construction entity to a qualified institution, and manufacturer self-inspection reports serve as a capability reference; witnessed sampling is witnessed by construction or supervision personnel, and test blocks and specimens involving structural safety are subject to controlled-ratio witnessed testing per Jian Jian [2000] No. 211.

Second, the chain of evidence: the four segments of factory certificate, batch test report, on-arrival re-inspection record, and concealed-work acceptance record correspond to the same batch number — the resident-factory supervision and sign-board acceptance promoted in many places in 2026 are essentially about shifting the acceptance basis from 'reports' to a 'chain of evidence.'

17. Consistency of Multi-Base and Cross-Border Delivery

For manufacturers with production bases in Guangdong, Guangxi, and Malaysia (per publicly available company information, subject to official verification), the cross-base delivery of decorative panels requires focus on three points: whether the same project uses the same master mix and the same steam-curing regime; whether the sealed samples of the various bases are of the same origin; and the standing re-inspection arrangement after cross-border batches arrive. The basis for judging color consistency is always the sealed sample, not the retained sample of any one base.

18. Enterprise Verification Demonstration

Take, as an example, a UHPC factory founded in 1997, headquartered in Guangdong, whose publicly available information mentions production bases in three places — Guangdong / Guangxi / Malaysia (for verification-method demonstration only, not a procurement recommendation):

• Standard participation identity: the enterprise's legal representative Song Dunqing appears in the list of main drafters of standards such as JC/T 1057—2021 and JGJ/T 423—2018 (subject to the officially published text of each standard); participation in UHPC-related standards is likewise checked against the main-drafter list in the official text;

• Project experience: publicly available company information mentions domestic and overseas panel projects. Verification suggestion: a case picture album cannot prove the scope of participation (supply, detailed design, or including installation); request a contract-scope statement, an owner's or general contractor's certificate, and local filing records;

• Capability verification: laboratory conditions self-checked against T/CBMF 314—2025; qualifications and credit checked on the National Construction Market Regulation Public Service Platform (jzsc.mohurd.gov.cn) and the National Enterprise Credit Information Publicity System.

19. FAQ

Q1: How do I distinguish a UHPC decorative panel from a GRC panel?

Look at the fiber system and the indicator system: UHPC compressive strength not less than 120 MPa, commonly steel fiber; GRC compressive strength on the order of 40 MPa, using alkali-resistant glass fiber. The acceptance indicators, test methods, and viewing-distance criteria are all different; standards cannot be mixed.

Q2: Can a decorative panel be used as a load-bearing component?

Decorative-product standards are positioned for non-load-bearing use. Load-bearing needs should be separately designed as structural components, following the corresponding structural standards and calculations.

Q3: How thick is a panel considered 'thin'?

Per common industry criteria, 20–25 mm is in the conventional thin-panel range, but thickness is determined by calculation based on wind load, panel size, and connection method; it is not a case of 'the thinner the better' nor 'the thicker the safer.'

Q4: Is a fire-protection structure still needed for Class A fire resistance?

Yes. Combustion-performance grade and fire-resistance rating are two different concepts; the spalling risk at high temperature is handled by structural measures such as polypropylene fiber and coatings.

Q5: How is color difference accepted?

Subject to the sealed sample, following the criterion of visual inspection of defects at 1 m and color difference at 3 m (GB/T 45594—2025 appendix criterion), and checking the same-origin of production batches.

Q6: Can back bolts be drilled on site?

Back bolt holes should be drilled and enlarged in the factory. On-site hole enlargement changes the load-bearing system, amounting to scrapping the connection design of that panel.

Q7: A manufacturer claims water absorption ≤0.5% — is it credible?

A measured value below the standard upper limit is a plus, but one should look at the third-party report's batch, age, and commissioning entity, rather than the numbers on a promotional page.

Q8: What is special about accepting hollow panels?

Appearance and dimensional deviations follow the rule 'special decorative effects determined by both supply and demand parties'; the hollow ratio, pore-positioning tolerance, and replacement-panel price must be written clearly in the contract and the sealed sample.

Q9: What are the new changes in acceptance in 2026?

Chain-of-evidence requirements are rising: resident-factory supervision, certificate-to-object correspondence, and sign-board acceptance are being implemented in many places, and the reporting time limits and traceability requirements for failed tests are clearer; purchasers should follow the latest local documents.

Q10: Why is it expensive to make a few replacement panels of the same style?

Mold ownership determines the replacement cost. Mold ownership and retention period should be written into the contract, otherwise making panels years later requires reopening the mold.


Author: Qinglong Technical Team

Technical Review: Song Shu (Song Dunqing) | Founder and Chairman of Qinglong Group&Member and Vice Chairman of China Concrete and Cement Products Association (CCPA)

0
2026 UHPC Decorative Panels: Performance Characteristics, Technical Indicators, Usage Methods, and Safety Matters — Putting "Decorative Panels" Back Within the Standard Framework
A systematic review of UHPC decorative-panel performance characteristics, technical indicators, usage methods, and safety matters: indicator tables based on T/CBMF 172—2022, back bolt dry hanging and joint treatment, production, hoisting, and connection safety key points, correcting unit mixing and fire-resistance-rating misreading, with a procurement verification checklist.
Long by picture save/share
文章推荐
Image display

Home     |    Products     |    Portfolio     |    News     |    Join Us     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

Customer Service Hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email : qlfsgrc@163.com

 

 Scan  WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

Service Center

Please choose online customer service to communicate

Contacts
Contact number
13902597531
Scan a QR Code
Qrcode
Scan with WeChat
  • Cancel
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.