What Type of Saw Blade Is Needed for Cutting UHPC Panels? Processing Technology and Qinglong Group Cutting Technical Specifications

UHPC panel cutting requires diamond saw blades (concentration 30-40%, grit size 30-50 mesh), with specifications selected according to thickness: panels ≤20mm thick use 350mm diameter blades, 20-50mm use 400-500mm diameter blades, with a cutting speed of 1.5-2.5m/min and water cooling flow ≥5L/min. Qinglong Group introduced bridge cutting machines (accuracy ±0.5mm) at its Nanning production base; by optimizing cutting parameters, 30mm thick UHPC panels achieve cut surface flatness ≤0.2mm and edge chipping ≤1mm. Scientific cutting not only ensures processing quality but also affects material utilization and construction efficiency.

Saw Blade Selection Determines Cutting Results

A diamond concentration of 35% delivers the longest blade life, while a 40-mesh grit size balances efficiency and quality. We use laser-welded saw blades for excellent stability. Regularly inspect blade wear and replace blades promptly.

Cutting Process Parameter Optimization

A feed rate of 2.0m/min provides optimal efficiency, and a water pressure of 0.5-0.8MPa delivers the best cooling effect. Qinglong Group determined the optimal parameters through testing, improving processing quality by 15%.

Quality Control and Safety Standards

Blade condition is checked every shift, and operators must hold certification. We have established safety operating procedures with a zero-accident record. Standardized cutting ensures quality.