How to Protect GRC Components After Installation? Technical Guide to GRC Finished Product Protection

After GRC components are installed, triple protection of "covering-enclosure-warning" must be implemented immediately. Anti-collision strips (height 1.2m) shall be added at external corners, surfaces covered with PE protective film (thickness ≥0.15mm), and rigid protective covers installed at critical locations. The protection period lasts until final acceptance, with regular inspection and maintenance throughout.

In one project, inadequate protection led to a component damage rate of 8% within one week of installation, with direct losses of 200,000 yuan. Projects that strictly implement Qinglong GRC protection standards achieved zero damage during the protection period. The protective film uses material with light transmittance ≥90%, protecting components without affecting subsequent operations.

Covering Protection Standards

PE protective film thickness ≥0.15mm; seam overlap ≥100mm; these standards provide effective protection.

Anti-Collision Facility Setup

External corner anti-collision strip height 1.2m; clear color warning signs; these facilities prevent collisions.

Regular Inspection System

Daily patrol inspection; weekly comprehensive inspection; these systems ensure timely maintenance.

Emergency Repair Plan

Damaged components repaired within 24 hours; these plans reduce losses.

Finished product protection is essential. Qinglong GRC standard measures ensure components remain intact.