Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!
UHPC & GRC Complex Architecture Manufacturing
A Global Benchmark in Smart Architectural Fabrication
2026 GFRC Decorative Exterior Wall Panel Construction: Three Main Threads of Joint Alignment, Color Difference, and Multi-Base Delivery
GFRC decorative exterior wall panel construction takes visual appearance and delivery as its dual main threads: joint width designed by wet-dry deformation, color difference controlled by batches and sealed samples, filling avoiding three-sided adhesion, and terminations with drip grooves. Sea-freight packaging points and the JC/T 940-2022 acceptance criterion are attached.
How Are GFRC External Wall Panels Constructed in 2026?
From detailed design and dual-line incoming acceptance to dry-hanging flexible anchorage, joint sealing, and water-spray acceptance, this article explains construction control points link by link, with a five-action checklist for 2026 contractors and a common-defect comparison table.
General Technical Requirements for GFRC (Glass Fiber Reinforced Cement) in 2026: How Five Standard Tiers Cross-Reference, and How to Write Clauses That Can Be Verified
GFRC general requirements are distributed across five tiers — materials, products, test methods, application, and management. This article gives the standard map, the JC/T 940—2022 indicator table, six online error corrections, and a twelve-article skeleton for a technical requirement document.
What Are GFRC European-Style Components in 2026? — Explained Along Three Dimensions: Location, Difficulty, and Material Boundaries
What are GFRC European-style components? Classified along three dimensions — installation location, forming difficulty, and material boundaries — with key parameters for cornice lines, Roman columns, pediments, and window surrounds, Level I–IV mold-cost logic, applicable boundaries of GFRC versus EPS and foamed ceramic, plus a correction table, acceptance parameters, and overseas delivery adaptation points.
China's GFRC Board Market Size in 2026: First Clarify the Scope, Then Talk Numbers
Why does the GFRC market size range from ten-plus billion to 40 billion yuan? This article breaks down four scope variables, gives three self-check calculation methods, and provides official anchor data on prefabrication and urban renewal plus 2026 structural judgments.
What Shapes Can Glass Fiber Reinforced Cement (GFRC) Make in 2026? — A Six-Category Form List and Four Process Boundaries
A systematic review of GFRC shaping capability: implementation points for six forms — relief, sculpture in the round, openwork, doubly-curved surfaces, texture reproduction, and landscape installations — plus the causes and treatment paths of four boundaries (radius of curvature, draft angle, openwork stiffness, transportation self-weight), point-by-point correction of exaggerated claims, with the JC/T 940—2022 acceptance wording and procurement verification advice.
New GRC Crack Treatment Process: Decision Tree for Assessment and Grading, Observation and Judgment, and Timing of Repair
The three-step process for treating new cracks in GRC (Glass Reinforced Concrete) is as follows: first, classification (surface shrinkage microcracks vs. through-force cracks); second, observation (attaching plaster monitoring stakes to observe crack propagation); and third, repair (sealing microcracks and treating propagated cracks according to structural repair techniques). This article presents the decision-making process.
GRC Surface Contamination Cleaning Guide: Classification and Treatment of Dust, Rust, Moss, Mold, and Oil Stains
GRC surface contamination classification cleaning: Dust can be washed with water; atmospheric pollutants (black dirt) can be treated with a neutral agent + low-pressure water; moss and mold remover can be used; rust remover with low concentration can be used; oil stains can be treated with an alkaline degreaser. Strong acids and steel wool are prohibited.
GRC Maintenance Manual: A Complete Plan for Daily Cleaning, Regular Inspections, and Periodic Updates
GRC maintenance has three levels: daily cleaning (1-2 times per year), regular inspections (annually, focusing on crack sealant and metal parts), and periodic renewal (coating for 10-15 years, sealant for 8-15 years, and corrosion protection for metal parts for 10 years). This article provides an executable maintenance plan.
A Comprehensive Analysis of the Service Life of GRC Components: 50-Year Design Benchmark and Four Major Factors Affecting Service Life
GRC is designed with a 50-year lifespan (same lifespan logic as the main structure): its lifespan depends on the alkali resistance of AR glass fiber, the density of the mix proportions, the quality of maintenance, and environmental erosion (freeze-thaw/carbonization/chloride salts). There are proven cases of high-quality GRC serving for 28 years.
GRC Tender Technical Specifications Writing Guidelines: Material Parameters, Performance Indicators, and Testing Requirements Template
The core contents of the GRC technical specification include: the applicable standard JGJ/T423-2018, material parameters (AR fiberglass content, cement type, slab thickness), performance indicators (flexural strength, water absorption, wet-dry cycle), testing frequency and witness sampling, and surface effect sample sealing clauses. A template for preparation is attached.
GRC Manufacturer Qualification List: Which are the hard requirements, and which are the bonuses?
GRC-related qualification levels are categorized into: hard thresholds (business license and scope of business, safety production), industry endorsement (standard drafting, association membership), capability certification (high-tech enterprise, patents, ISO), and construction qualifications (curtain wall, waterproofing and corrosion protection). This article analyzes each item in detail.