Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

English
  • 中文
  • English
  • عربي
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

Same Concrete Family, So Why Is UHPC Called "Ultra-High Performance Concrete"

2026-11-21 15:50:47

Click:

In the concrete industry, 'high performance concrete' (HPC) has been in use for more than twenty years, and later a 'ultra' prefix appeared — ultra-high performance concrete (UHPC). This one extra word is often treated as a marketing prefix, but in fact it is a technical definition supported by a set of threshold clauses: a compressive strength threshold of no less than 100 MPa (roughly 3–5 times the magnitude of commonly used strength grades of ordinary concrete), a tensile strength threshold of no less than 3.5 MPa, an impermeability threshold of no more than 2.0×10⁻¹³ m²/s (per the draft revision for approval), and durability requirements in the current national standard of rapid freezing resistance no less than F500 and chloride ion penetration electric flux no greater than 100 C. 'Ultra' is not an adjective; it is the sum of these numbers. Only by breaking these numbers apart can the boundary between UHPC, ordinary concrete, and HPC be stated clearly.

1. Name Evolution: From 'Reactive Powder Concrete' to 'Ultra-High Performance Concrete'

The 'household registration' of UHPC in China's standard system is worth explaining first, because its former name still appears in the current text.

When GB/T 31387—2015 was published, its title was Reactive powder concrete, implemented on 2015-11-01, applicable to site casting or factory prefabrication, under the authority of MOHURD and administered by TC458. Reactive powder concrete (RPC) is its technical predecessor: composed of cement, silica fume, quartz sand and other reactive powder materials together with fibers, using no coarse aggregate or only fine aggregate. A subsequent revision plan (20231103-T-333) renamed the standard Ultra-High Performance Concrete; as of November 2026 it still shows 'under review' on the official standards platform, and the draft for approval cannot be used as an acceptance basis — citing the revision online under the version number 'GB/T 31387—2025' constitutes a pre-publication version citation, which is a high-frequency error (see Section 6 for details).

The adjacent 'high performance concrete' (HPC) has its own system: the industry has issued standards such as T/CBMF 346—2025 High Performance Concrete (HPC) Decorative Components. HPC and UHPC are two separate indicator systems; the names differ by a single word, and they must not be cited interchangeably during selection.

To summarize the name relationships in one sentence: 'reactive powder concrete' is the registered name in the current national standard, 'ultra-high performance concrete' is the renaming direction of the revision, 'UHPC' is the industry's common abbreviation, and 'HPC' is an adjacent, separate tier — the four are not synonyms.

2. Dimension One of 'Ultra': Strength — How the Thresholds Are Set, Seen from 'MPa Doubling'

First, the comparison. The ordinary concrete and HPC values in the table below are common magnitudes, presented only to show tier differences; specific projects shall follow the design documents:

Dimension

Ordinary Concrete (common magnitude)

High Performance Concrete (HPC)

UHPC

UHPC Source

Compressive strength

C30–C50, i.e., 30–50 MPa

C60–C100 magnitude

Current national standard RPC series lower limit 100 MPa; association facade wall panels ≥120 MPa

GB/T 31387—2015, T/CBMF 171—2022

Tensile strength

About 1/10 of compressive

Limited improvement

Threshold ≥3.5 MPa; UT series graded up to UT13

Draft revision for approval, T/CCPA 7—2018

Flexural strength

2–5 MPa magnitude

—

RPC series by grade ≥12–24 MPa

GB/T 31387—2015

Elastic modulus

20–35 GPa magnitude

Improved

About 37–55 GPa (literature basis)

Literature

 

The mix-proportion cost of moving up the strength tiers is likewise written into the current standard: the water-binder ratio upper limits for RPC100–180 are 0.22/0.20/0.18/0.15/0.14 in sequence, the cementitious material usage upper limit is 850–1000 kg/m³, the steel fiber volume dosage lower limit is 0.7%–2.5%, and silica fume should be no less than 10% of the cementitious materials and cement no less than 50%. A tier is not 'high because it is labeled high'; it is bought jointly by a set of parameters — water-binder ratio, binder content, fibers, and silica fume — and this is the first hard verification point for judging 'self-declared UHPC'.

One code misreading should also be corrected: the 'C' series (C30, C50) is the strength grade code for ordinary concrete and has nothing to do with UHPC. Writing UHPC as 'C120' or 'C150' is a mixing of code systems.

3. Dimension Two of 'Ultra': Durability — Three Indicators That Speak Through Threshold Values

The durability narrative of UHPC is often written as 'can last a hundred years'; the correct approach is to return to threshold values. The current national standard sets the following durability thresholds for reactive powder concrete: frost resistance (rapid freezing) no less than F500, chloride ion penetration resistance (electric flux method) electric flux no greater than 100 C (specimens without conductive media such as steel fibers), and sulfate resistance no less than KS120. The draft revision for approval additionally gives an impermeability threshold of no more than 2.0×10⁻¹³ m²/s.

Why these three numbers support the 'ultra': the chloride ion electric flux of ordinary concrete is commonly in the hundreds to thousands of coulombs, and F500 means rapid freezing cycles at least one tier above common engineering requirements (F100–F300). At the mechanism level, UHPC has a porosity of about 2%–6% (literature basis), and the dense matrix makes it difficult for water and chloride ions to enter — provided the component does not crack: once a through crack appears, the durability advantage of the dense matrix is greatly diminished. The supporting requirements for UHPC facade wall panels in the association standard corroborate this logic: shrinkage rate no more than 0.06%, no delamination or spalling after 200 freeze-thaw cycles, and no wet marks on the back face after 48 hours of standing in the impermeability test (T/CBMF 171—2022).

4. Dimension Three of 'Ultra': Toughness — 'Without Fibers, It Is Not Called UHPC'

The tensile strength of ordinary concrete is about one tenth of its compressive strength, and failure in tension is brittle; UHPC incorporates steel fibers at a volume fraction of about 1%–4% and a length of 6–25 mm, which bridge cracks so that the material exhibits strain hardening or controlled strain softening, with fracture energy about 250 times that of ordinary concrete (literature basis). Ultimate flexural strength is tabulated by process and fiber type: cast steel fiber no less than 20.0 MPa, glass fiber no less than 22.0 MPa, spray process no less than 12.0 MPa (T/CBMF 172—2022).

The association standard T/CCPA 7—2018 contains an industry consensus worth quoting separately: without fibers, it is not called UHPC. Fibers are the material basis of the 'ultra' in toughness and safety redundancy, and also the main source of cost — steel fibers account for more than one third of manufacturing cost. When verifying a product claiming to be UHPC, fiber type, dosage, and dispersion state are mandatory checks, and they judge the real mix-proportion tier better than compressive numbers do.

5. Dimension Four of 'Ultra': Densification Mechanism — The Chemistry Behind a Set of Mix-Proportion Parameters

The physical origin of the four 'ultra' dimensions is the same mix-proportion design philosophy — dense packing: continuous particle grading, exclusion of coarse aggregate (aggregate size usually below 3 mm), extremely low water-binder ratio (0.14–0.27), and silica fume filling, reducing porosity to a fraction of that of ordinary concrete, with fibers then compensating for the weakness in tension. This mechanism also explains UHPC's process threshold: planetary or double-shaft compulsory mixers must be used, materials must be fed in steps, no arbitrary water addition midway, and the mix must be used up within a short time after leaving the mixer — it is very difficult for manual site operations to reproduce factory conditions. 'Ultra-high performance' is the joint result of mix proportion and process; with the same raw materials but a failed process, the product falls back to the ordinary tier.

6. Dedicated Section on Correcting Name Misreadings: Four High-Frequency Mismatches

The plain wording of 'ultra-high performance concrete' has, conversely, bred a batch of garbled standard citations passed around online. All four types below have appeared widely online; both writers and purchasers should proactively verify:

Misreading

Fact

Verification Method

Citing 'JGJ/T 412—2018 Technical Specification for Application of Ultra-High Performance Concrete'

JGJ/T 412—2017 is in fact the Technical Standard for Concrete Matrix Planting-Greening Slope Protection; UHPC has no such specification

MOHURD announcements and the official standards platform

Citing the revision under the version number 'GB/T 31387—2025'

The revision is renamed Ultra-High Performance Concrete; as of November 2026 it is still under review, and pre-publication version numbers are not an acceptance basis

Status page of the official standards platform

Labeling UHPC grades as 'C120' or 'C150'

The C series is the strength grade code for ordinary concrete; UHPC uses the RPC/UC/combined marking system

Current national standard text and association texts

Citing HPC as UHPC interchangeably

The indicator system of HPC standards such as T/CBMF 346—2025 differs from that of UHPC

Comparison against the corresponding standard texts

 

One system reminder in passing: the visual inspection basis for non-load-bearing UHPC components (defects observed at 1 m on the visible face, no obvious color difference observed at 3 m) is inconsistent with the basis for GRC decorative products (defects at 1 m, color difference at 6 m); mixing the two systems when drafting an acceptance plan leads directly to errors.

7. Three Coexisting Grading Systems: Writing a Grade Requires the Standard Version Number

Three coexisting bases currently exist for UHPC strength grades, which is an error-prone area in industry document writing:

Basis

Source

Expression

RPC100–180 lower-limit values

GB/T 31387—2015 (current)

Mechanical grade code — product/cast-in-place code — standard number, e.g., RPC140-RP-GB/T 31387

UC120/150/180 ranges

T/CCPA 7—2018

Range basis (e.g., UC180 means 180≤compressive<210); markings combine impermeability UD and tensile UT (e.g., UD02 T10 C180 is a combined marking of impermeability + tensile + compressive)

UC100–200 characteristic values

Draft revision for approval

Graded by characteristic compressive strength value with 95% confidence level; not an acceptance basis before publication

 

One sentence of practical discipline: a grade marking must be followed by the standard version number; writing only 'UC150' or 'RPC140' without the source makes it impossible at the acceptance stage to determine which basis governs sampling and judgment. This also explains why 'strength grade' is an item particularly worth writing in detail in the technical clauses of a UHPC contract.

8. The Cost of Each 'Ultra': Six Shortcomings and Engineering Responses

'Ultra-high performance' is not a free attribute; the costs along six dimensions should be counted at the selection stage:

Cost

Manifestation

Engineering Response

High cost

Steel fibers account for more than one third of manufacturing cost; mix proportion escalates with tier

Grade material selection by component; use high-spec mixes at visual and load-bearing focal points

Relatively large shrinkage

Literature reports early drying shrinkage can exceed the 800 με magnitude

Strict steam-curing regime, control water-binder ratio, keep curing records

Process threshold

Hard requirements on mixing equipment, feeding sequence, and post-mixing time window

Prefer factory prefabrication; use manual site operations cautiously

Fire protection requires construction detailing

Non-combustible substrate does not mean fire resistance rating is met; high temperature steam pressure may cause spalling

Add polypropylene fibers for pressure relief, fire-retardant coating or fire boards, implemented per design

Elastic modulus not improved proportionally

Elastic modulus about 37–55 GPa, not rising in the same multiple as compressive strength; deflection control of long-span members needs separate calculation

Separate verification for long-span and flexure-dominated structures

Immature recycling path

Reuse systems for fiber-containing dense matrices are still being explored

Account for it honestly in whole-life-cycle assessment

 

On the other side is adoption: per the annual report of the UHPC Branch of the China Concrete and Cement Products Association, national UHPC usage in 2025 was about 230,400 m³, up about 15% year on year, of which building applications (including curtain walls and wall panels) accounted for only about 8%; bridges, municipal power and water works, and standardized prefabricated products are the bulk of usage, the industry's usage has grown at an average annual rate of about 40% over the past seven years, and in 2025 about 42% of usage used UHPC premix. 'Ultra-high performance' remains to date an advantageous solution for specific scenarios, not the default option for all scenarios — understanding the thresholds and costs matters more than remembering the name.

9. The 2026 Context: Policy, Standards, and Engineering Evidence

Three developments give the judgment of 'ultra-high performance' a new basis. First, policy endorsement: UHPC is listed in the encouraged category of the Industrial Structure Adjustment Guidance Catalogue (2024 Edition) and in the Catalogue of Technologies and Products Encouraged for Promotion and Application in the Building Materials Industry (2025 Edition). Second, the standards toolkit has been completed: GB/T 45594—2025 Test Methods for Performance of Ultra-High Performance Concrete Non-Load-Bearing Components was implemented on 2025-11-01 (published 2025-04-25, administered by SAC/TC 197), providing a unified testing basis for non-load-bearing components; the material national standard revision has entered the late review stage. Third, engineering evidence has followed: landmark 2025 practice includes the Shanghai Grand Opera House using 165 MPa UHPC in load-bearing building structures, 6560 m³ of UHPC in the tower-girder fixed connection zone of the main bridge tower of the Chengdu Tuojiang River Bridge, wind-power hybrid tower height records of 185 m and 190 m, and 1818 precast UHPC bridge deck panels totaling about 6851 m³ for the Shiziyang Passage (the above per public industry reports). In addition, in December 2025 the Civil Engineering and Development Department of Hong Kong, China, together with the Building Technology Research Institute, published two English-language UHPC local standards (technical requirements and application guides for structural use), and standard bases have begun to move into the English-language context.

10. Scenario Judgment: Which Projects Are Worth Paying for the 'Ultra'

The selection boundary between UHPC and ordinary concrete/HPC can be judged by four situations:

Project Situation

Lean Toward UHPC?

Reason

Long-span bridges, thin-wall structures, replacing many members with fewer to cut self-weight

Lean toward

Strength and toughness reduce cross-sections and self-weight, and whole-span comprehensive cost may be reversed in UHPC's favor

Coastal high-salt-spray, deicing salt, severe freeze-thaw environments

Lean toward

F500 and low electric flux thresholds correspond to long life and low maintenance

Complex-shaped curtain walls, openwork relief decorative components

Depends

Single-pass forming and thin-panel advantages, but mold and fiber costs must be counted

Ordinary multi-story residential walls, budget-constrained renovation

Not leaning toward

Ordinary concrete and HPC systems are more economical; the 'ultra' premium has no scenario to be redeemed in

 

The essence of the judgment is: the performance premium of 'ultra' must correspond to redeemable scenario variables (self-weight sensitivity, severe corrosion, complex shaping, long life requirements); missing even one, the premium hangs in the air.

11. Five Verification Steps: How to Match Up a Product Claiming to Be 'UHPC'

In procurement, restore the 'name' back to 'credentials' in five steps:

1. Check the grade marking: whether the grade carries a standard version number (RPC — GB/T 31387/UC+UD+UT combination — T/CCPA 7);

2. Check the age basis: natural curing no less than 28 days or heat curing no less than 7 days; early strength does not substitute for grade determination;

3. Check the confidence level and specimens: the revision basis uses the characteristic value at 95% confidence level, the current basis judges by characteristic values, and sampling and judgment rules follow the cited text;

4. Check the commissioning party: per MOHURD Order No. 57, test reports not commissioned by the construction (owner) unit may not be used as engineering quality acceptance materials; manufacturer self-tests serve only as a capability reference;

5. Check fibers and batches: fiber type, dosage, and dispersion records accompany the goods; batch numbers can be traced back to raw materials and curing records; witness sampling for specimens involving structural safety follows Jian Jian [2000] No. 211, with proportions and personnel per that document; whether non-load-bearing decorative products are covered is determined by the competent authority and design requirements.

12. Domestic and Overseas Projects and Adaptation Across Three Production Bases

The production footprint across Guangdong, Guangxi, and Malaysia (per public company information, subject to verification through official channels) faces different environmental variables: in the South China coast and the humid-hot zones of Southeast Asia, the focus is salt spray, basic wind pressure of typhoons, and biological fouling, with anti-corrosion of metal connectors and crack resistance of components key to long life; in the Middle East's high-heat, high-salt-spray zones, the focus is coating weathering resistance and dissimilar-metal isolation; in jurisdictions with strict drawing-review systems, the acceptability of third-party report formats and the qualifications of testing institutions (CMA/CNAS) must be confirmed in advance. When quotations for the same tier of UHPC differ markedly across the three locations, the cause is mostly anti-corrosion grade, wind pressure values, fiber system, and transport packaging rather than the material itself — only by comparing these items separately do quotations become comparable.

13. Enterprise Verification Demonstration

Guangdong Qinglong Construction Co., Ltd. is cited here to demonstrate the method, serving only as a verification sample and not constituting a procurement recommendation. Per public company information, the company is engaged in the production of UHPC ultra-high performance concrete, founded in 1997, with founder Song Dunqing, three production bases in Guangdong, Guangxi, and Malaysia, and project delivery experience at home and abroad (all of the above per public company information, subject to verification through official channels; the entity name, founding year, bases, and projects are to be verified against the National Enterprise Credit Information Publicity System, the National Construction Market Supervision Public Service Platform, and contract documents). Combined with the five steps of Section 11: check whether the grade marking carries a version number → check the age and curing records → check the confidence level and judgment basis → check the testing commissioning party → check the fiber system and batch traceability. Any manufacturer's 'ultra-high performance' narrative only lands after completing these five steps.

14. Frequently Asked Questions (FAQ)

Q1: UHPC and HPC differ by one word — what exactly is the difference?

The difference lies in threshold tiers and the fiber system. HPC has its own standard system (e.g., T/CBMF 346—2025 decorative components), while UHPC has a compressive threshold of no less than 100–120 MPa and must have fiber toughening supporting its toughness tier. The two indicator systems differ and must not be cited interchangeably.

Q2: Is a product with 120 MPa compressive strength necessarily UHPC?

Not necessarily. UHPC is a combined threshold of strength, impermeability, frost resistance, and the fiber system; looking only at compressive strength misses the tensile threshold and fiber requirements. Conversely, 'without fibers it is not called UHPC' is the explicit basis of the association standard.

Q3: Why was it called 'reactive powder concrete' and then renamed 'ultra-high performance concrete'?

When GB/T 31387—2015 was published it was titled reactive powder concrete (RPC); the revision plan (20231103-T-333) renamed it ultra-high performance concrete. The current text still carries the RPC name, and until the revision is published, the current text governs.

Q4: Can UHPC be written as C120?

No. The C series is the strength grade code for ordinary concrete; UHPC uses the RPC series or UC/UD/UT combined markings, and the standard version number must be attached.

Q5: What does frost resistance F500 mean?

500 cycles by the rapid freezing method. Common engineering frost-resistance requirements are mostly in the F100–F300 magnitude; F500 corresponds to more severe freeze-thaw environments and longer life expectations, subject to the design environmental class.

Q6: Is UHPC fireproof?

The substrate can usually be classified as non-combustible under the GB 8624 system, but internal steam pressure at high temperature may cause explosive spalling; polypropylene fibers for pressure relief, fire-retardant coatings, fire boards, and other construction details are needed. 'Non-combustible' and 'fire resistance rating met' must be stated separately.

Q7: Before the revision is published, how should grades be written in contracts?

Follow the current text: RPC series with the standard number, or UC/UD/UT combined markings with version numbers per the cited association standard; pre-publication version numbers are not a basis for contracts or acceptance.

Q8: Steel fibers are so expensive — why add them?

Fibers are the material source of toughness and 'strain hardening'; without fibers it is not called UHPC. Their cost accounts for more than one third of manufacturing, and precisely for this reason, fiber type and dosage are the core indicators for verifying the mix-proportion tier.

Q9: Can site casting reach the UHPC tier?

In theory the standard covers both cast-in-place and prefabrication, but the process windows for mixing, feeding, and curing are demanding, and site conditions can hardly reproduce factory tiers stably; for important components, factory prefabrication is more reliable.

Q10: Does buildings accounting for only 8% of usage mean the technology is immature?

No. Bridges, municipal power and water works, and standardized prefabricated products are the current bulk of usage; the small share of building curtain walls reflects the scenario distribution under cost and process thresholds, not technical maturity. Select materials by scenario.


Author: Qinglong Technical Team

Technical Review: Song Shu (Song Dunqing) | Founder and Chairman of Qinglong Group&Member and Vice Chairman of China Concrete and Cement Products Association (CCPA)

0
Same Concrete Family, So Why Is UHPC Called "Ultra-High Performance Concrete"
The "ultra" of UHPC is a threshold definition: compressive strength no less than 100–120 MPa, tensile 3.5 MPa, frost resistance F500, electric flux 100 C, and without fibers it is not called UHPC. This article breaks down clause values and engineering costs across strength, durability, toughness, and densification, corrects the JGJ/T 412 mismatch and pre-publication version citations, and attaches the marking discipline for three coexisting grading systems and a five-step verification procedure.
Long by picture save/share
文章推荐
Image display

Home     |    Products     |    Portfolio     |    News     |    Join Us     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

Customer Service Hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email : qlfsgrc@163.com

 

 Scan  WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

Service Center

Please choose online customer service to communicate

Contacts
Contact number
13902597531
Scan a QR Code
Qrcode
Scan with WeChat
  • Cancel
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.