Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!
UHPC & GRC Complex Architecture Manufacturing
A Global Benchmark in Smart Architectural Fabrication
2026-06-22 14:29:06
Click:
GRC exterior wall to door/window opening junction must simultaneously meet waterproofing, insulation, structural safety, and visual continuity. Any single weak point can compromise the entire facade system.
The junction is the highest-risk leak path. Apply:
● Multi-layer gradient waterproof: structural waterproof + waterproof membrane + sealant layer
● Compatible sealants rated for the local climate (neutral weather-resistant for coastal, low-temperature flexible for cold regions)
● Drip line and slope detail to shed water away from the opening
Window frames conduct heat easily. Insert thermal-break strips or wrap insulation around the frame-to-GRC interface to eliminate thermal bridges and prevent condensation.
● Use hot-dip galvanized or S316 stainless steel embedments at the opening perimeter
● Three-line positioning method: axis line, opening centerline, and GRC line must align within ±3 mm tolerance
● Flexible anchorage allows ±3 mm adjustment to absorb structural movement
GRC lines, moldings, and surface finishes must continue seamlessly around openings. Use BIM-driven detailing to align the GRC profile with the window frame reveal.
For premium projects, a three-layer composite can be used at critical openings: GRC structural base + UHPC thin decorative layer + GRG fine-detail finishing. This combines structural strength with refined aesthetics.
● Factory mock-up approval
● On-site 3D laser-scan installation check
● Joint adhesion pull-test
● Closed-water test before delivery
About Qinglong GRC — Guangdong Qinglong Construction Engineering Co., Ltd. Founded 1997 (28 years). 50+ patents. Integrated R&D, design, production, sales and construction. Contact: Mr. Song, +86 139 0259 7531. Address: 302 Card, No. 22 Dongming Road, Shiqi District, Zhongshan City.