Saw Blade Selection Guide for UHPC Panel Cutting

UHPC board cutting requires diamond saw blades with a core hardness of HRC45-50 and a diamond grit size of 30/40-40/50. Qinglong Group recommends saw blades with a diameter of 350-400mm and a peripheral speed of 25-30m/s, delivering high cutting efficiency and smooth, even cut surfaces.

Saw blade parameters affect cutting quality. A segment height of 7-8mm and a concentration of 25%-30% ensure wear resistance. Water cooling lowers the temperature and prevents material burn. The kerf width should be controlled at 2-3mm to reduce material loss.

Proper operating procedures ensure safety. Maintain a cutting speed of 0.5-1m/min with uniform feeding. Dress the saw blade regularly to keep it sharp. Through scientific blade selection and operation, achieve efficient, high-quality cutting.