How to Set Up Temporary Supports During GRC Panel Installation? GRC Construction Support Technical Specifications

Temporary supports for GRC panel installation shall be set up according to the principles of "stable, adjustable, and safe". Support point spacing ≤1.5m, distance from panel ends ≤0.3m, and support force ≥1.5 times the panel weight. The support system must have three-dimensional adjustment capability (vertical adjustment ≥50mm, horizontal adjustment ≥30mm) to ensure stability and safety before panel positioning.

Specific setup requirements: use dedicated support frames with vertical post spacing ≤1.2m and horizontal bar lift spacing ≤1.5m. Support frames must be reliably connected to the structure, withstanding horizontal loads ≥1.0kN/m. In one project, insufficient temporary supports caused panel overturning, resulting in severe losses. Projects with supports set up according to specifications were installed smoothly with no safety incidents.

Support Point Layout Principles

Spacing ≤1.5m; distance from panel ends ≤0.3m; these principles ensure stability.

Support System Requirements

Three-dimensional adjustability; sufficient load-bearing capacity; these requirements facilitate installation.

Safety Control Measures

Anti-overturning measures; these measures prevent accidents.

Removal Timing Control

Remove only after permanent fixing; these controls ensure safety.

Temporary supports are vital to safety. Qinglong GRC standardized construction leaves nothing to chance.