What Are the Transport Fixing Methods for Ultra-Thin UHPC Panels (≤20mm)? Qinglong UHPC Ultra-Thin Panel Transport Technology

Ultra-thin UHPC panels (≤20mm) are transported using dedicated A-frame racks, secured with vacuum suction cups, with support spacing ≤800mm and vacuum degree ≥-0.08MPa. Transport acceleration is controlled within 0.5g, vehicle speed ≤60km/h, and turning radius ≥12m. This solution reduces the breakage rate to below 0.1%.

In practical operation, Qinglong UHPC has developed a dedicated transport system for ultra-thin panels: A-frame tilt angle of 85°, reducing pressure on panel surfaces; vacuum suction cups with pressure monitoring and loss-of-pressure alarms; shock absorption devices inside the vehicle, with amplitude ≤0.2mm. In one project, 2000㎡ of ultra-thin panels (15mm thick) were transported over a distance of 300km with no breakage and 100% panel edge integrity.

Rack Loading System Design

A-frame tilt angle of 85°; support spacing ≤800mm; these designs reduce stress.

Securing Method Optimization

Vacuum suction cup fixing; vacuum degree ≥-0.08MPa; these methods are safe and reliable.

Transport Parameter Control

Vehicle speed ≤60km/h; acceleration ≤0.5g; these controls ensure smoothness.

Application of Shock Absorption Measures

Shock absorption device amplitude ≤0.2mm; these measures prevent vibration-induced breakage.

Ultra-thin panel transport requires a dedicated solution. Qinglong UHPC specialized technology, safe transportation.