Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

English
  • 中文
  • English
  • عربي
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

What to Do When GRC Cracks? Qinglong GRC Crack Treatment System Project

2025-12-23 14:51:48

Click:

The treatment of GRC cracks requires targeted solutions based on the nature, width, and depth of the crack. By width, cracks can be classified into: microcracks (≤0.1mm), fine cracks (0.1-0.3mm), and structural cracks (≥0.3mm). Based on extensive repair cases, Qinglong GRC has developed a scientific crack treatment system.

In a commercial complex project in Wuhan, the GRC decorative columns developed 0.2mm thermal cracks. Qinglong adopted a comprehensive treatment solution of “grouting + reinforcement”: first injecting epoxy resin slurry (viscosity ≤200cps) with a low-pressure syringe, then bonding carbon fiber fabric for reinforcement. Post-repair testing showed that the load-bearing capacity was restored to 115% of the design value, with no visible repair traces on the surface. The project’s automatic crack monitoring system tracks crack development in real time, providing data support for preventive maintenance. This comprehensive treatment solution achieves a repair effectiveness retention rate of over 95%.

Surface Sealing Method

Suitable for microcracks with a width ≤0.1mm. Uses penetrating sealants with a penetration depth of 3-5mm. Application temperature must be between 5-35℃. This method is a preventive treatment.

Pressure Grouting Method

For treating active cracks of 0.1-0.3mm. Uses modified epoxy resin slurry at a grouting pressure of 0.2-0.5MPa. Injection ports are set at 200-300mm intervals. This method restores structural integrity.

Joint Filling Method

Used for wide cracks ≥0.3mm. A V-shaped groove is cut to a depth of crack depth +5mm. Filled with polymer-modified cement-based material. This method is suitable for non-structural cracks.

Structural Reinforcement Method

For cracks with insufficient load-bearing capacity. Carbon fiber fabric or steel plates are bonded for reinforcement. Prestressed steel strands are added when necessary. This method is a fundamental treatment.

Crack treatment requires professional judgment. Qinglong GRC offers free technical diagnosis and treatment solution design services.

0
What to Do When GRC Cracks? Qinglong GRC Crack Treatment System Project
Long by picture save/share
文章推荐
Image display

Home     |    Products     |    Portfolio     |    News     |    Join Us     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

Customer Service Hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email : qlfsgrc@163.com

 

 Scan  WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

Service Center

Please choose online customer service to communicate

Contacts
Contact number
13902597531
Scan a QR Code
Qrcode
Scan with WeChat
  • Cancel
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.