Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

English
  • 中文
  • English
  • عربي
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

What to Do About GRC Cracks? Qinglong GRC Crack Treatment System Project

2025-12-20 14:51:48

Click:

The treatment of GRC cracks requires targeted solutions based on the crack's nature, width, and depth. Cracks can be classified by width into: micro cracks (≤0.1mm), fine cracks (0.1-0.3mm), and structural cracks (≥0.3mm). Based on extensive repair cases, Qinglong GRC has developed a scientific crack treatment system.

In a commercial complex project in Wuhan, GRC decorative columns developed 0.2mm temperature cracks. Qinglong adopted a comprehensive treatment solution of "grouting + reinforcement": first, epoxy resin slurry (viscosity ≤200cps) was injected using a low-pressure injector, followed by bonding carbon fiber sheets for reinforcement. Post-repair testing showed that the load-bearing capacity recovered to 115% of the design value, with no visible repair marks on the surface. The automatic crack monitoring system used in this project can monitor crack development in real time, providing data support for preventive maintenance. This comprehensive treatment solution achieved a repair effect retention rate of over 95%.

Surface Sealing Method

Suitable for micro cracks with a width ≤0.1mm. Uses a penetrating sealant to a depth of 3-5mm. Application temperature must be between 5-35℃. This is a preventive treatment method.

Pressure Grouting Method

Treats active cracks of 0.1-0.3mm. Uses modified epoxy resin slurry with a grouting pressure of 0.2-0.5MPa. Grouting ports are set at intervals of 200-300mm. This method restores structural integrity.

Joint Filling Method

Used for wide cracks ≥0.3mm. A V-shaped groove is cut to a depth of crack depth +5mm. Filled with polymer-modified cement-based materials. This method is suitable for non-structural cracks.

Structural Reinforcement Method

For cracks with insufficient load-bearing capacity. Carbon fiber sheets or steel plates are bonded for reinforcement. Prestressed steel strands are added when necessary. This is a fundamental treatment method.

Crack treatment requires professional judgment. Qinglong GRC provides free technical diagnosis and treatment solution design services.

0
What to Do About GRC Cracks? Qinglong GRC Crack Treatment System Project
Long by picture save/share
文章推荐
Image display

Home     |    Products     |    Portfolio     |    News     |    Join Us     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

Customer Service Hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email : qlfsgrc@163.com

 

 Scan  WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

Service Center

Please choose online customer service to communicate

Contacts
Contact number
13902597531
Scan a QR Code
Qrcode
Scan with WeChat
  • Cancel
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.